NJDSM http://njdsm.org/forums/ NJDSM en Sun, 20 May 2012 00:54:00 GMT vBulletin 60 http://njdsm.org/forums/images/misc/rss.png NJDSM http://njdsm.org/forums/ Island Wed 5/23 BBQ night http://njdsm.org/forums/showthread.php?10471-Island-Wed-5-23-BBQ-night&goto=newpost Wed, 16 May 2012 14:31:36 GMT Anyone up for meeting at Island for BBQ and T&T on wednesday night next week? Gates open at 6, they run 6:30 to 10:00. $25 to run and eat dinner.

IM planning to go make some more passes in my red 1G, likely on my everyday street tires, 93 pump gas, and street tune (I got booted for no roll bar last week on slicks/E85).

Nelson should be bringing out #431 for some testing with a new monsterous GT42R turbocharger and the nitrous kit back on the car for spool up. Should be interesting to see at least. ]]> General Discussion Nate Crisman http://njdsm.org/forums/showthread.php?10471-Island-Wed-5-23-BBQ-night turbo Transit van http://njdsm.org/forums/showthread.php?10470-turbo-Transit-van&goto=newpost Wed, 16 May 2012 02:47:41 GMT http://autos.yahoo.com/blogs/motoramic/vette-killing-chevy-express-van-looks-sleeper-home-213544613.html;_ylt=Apn9T64N6.Zmg9Md911gb6UQc78F;_ylu=X3oDMT... http://autos.yahoo.com/blogs/motoram...nlwYWdl;_ylv=3 ]]> General Discussion TurboMike http://njdsm.org/forums/showthread.php?10470-turbo-Transit-van For Sale: 1991 Eagle Talon 4000 OBO http://njdsm.org/forums/showthread.php?10469-For-Sale-1991-Eagle-Talon-4000-OBO&goto=newpost Sun, 13 May 2012 23:44:19 GMT I've decided to finally put my car for sale and although I rarely post on here I figured I would start here rather then put the car on craigslist. I've had the car a little over a year and rarely drive it as it was more of a fun project for me. Currently it has about 131k miles on the car and I was told by the previous owner the engine was rebuilt not long before I purchased the car but being as I have minimal paperwork from the PO it is just taking his word for it. I do however have all paperwork for anything that I had done to the car which includes having the head pressure checked and resurfaced, new head gasket and timing belt components, new Mishimoto radiator, DSMLink V3 Lite etc. Below is a quick rundown of what I positively know the car has as well as what the PO had told me.


Engine:

Stock original 6 bolt with new pistons with ACL bearings
New seals and gaskets
New waterpump and seals done with timing
Felpro head gasket
New timing belt, pulleys and tensioner
ARP head studs

Fuel:

Walboro 255Lp rewired
FIC 650's
New OEM fuel filter

Electrical:

Autometer boost guage in vent bezel
AEM Wideband
DSMLink V3 Lite


Intake:

BBK 75mm throttle body
Sheetmetal intake manifold
Custom front mount and 2 1/2 piping
GReddy Type S BOV
DSMLink Speed Density Package

Exhaust:

Evo 3 exhaust manifold
MHI 20g turbo rebuild using G Pop Shop parts (approx 100 miles) currently on 20 PSI
Custom O2 housing with Tial 38mm wastegate dumped
3" punishment racing downpipe
Dejon powerhouse kit 3" back to 3" Magnaflow cat and a bullet resonator

Drivetrain:

ACT 2600 with street disk
Fidanza 12lb flywheel
Extended slave cylinder
Newer lsd transmission approx 40k miles on it
3 bolt LSD rear
New oem pressure plate bolts and bolts for the crank

Interior is grey leather and exterior is primer black
Battery relocated to trunk
Fuel pump cut off switch

I may have missed some things but other then that the car has a small quarter sized rust spot on the drivers side rear quarter panel as well as on the lower drivers side door jamb which is also approx. the size of a quarter. I also have a small oil leak from the valve cover other then that I have used to car to get me to and from work a few times without issue. When first starting the car cold it's necessary to manually warm the car up which I blame on the BBK throttle body (it has caused me many headaches along with the car only wanting to idle at 1500 RPMs). As mentioned I rarely drive the car and it's more of a weekend toy that I had planned on eventually just running at the track and trying some auto x but have not as I would like to have it properly tuned before driving it hard. Currently I have done only a few pulls with it and am running about 10:1 AFR at WOT again at 20psi. I'm active on DSMTuners and my username there is SkyGrowsCold if you would like to do a search and I also recently posted the first pull I had done asking for feedback on that site. Unfortunately at this time I do not have any good photos of the car but will try and upload them when I am able. In the mean time if you have any questions feel free to ask by posting, texting or calling me at 609 661 4760 and I will do my best to answer them.

My main reason for selling the car is I am newly scuba certified and wish to pursue that new hobby although I really have no immediate need to sell the car being as I do enjoy the time working on it and driving it. Thank you for taking the time to look and if you are further interested I'm located near Long Beach Island NJ for reference. ]]> Store StillLearning http://njdsm.org/forums/showthread.php?10469-For-Sale-1991-Eagle-Talon-4000-OBO 1998 BMW 528i black on black 135k miles http://njdsm.org/forums/showthread.php?10468-1998-BMW-528i-black-on-black-135k-miles&goto=newpost Sun, 13 May 2012 01:50:00 GMT 1998 BMW 528i 135k miles. Fully loaded. Runs and drives good. No mechanical problem. Body and paint is fair. Interior is clean. Asking $3500. ... 1998 BMW 528i 135k miles. Fully loaded. Runs and drives good. No mechanical problem. Body and paint is fair. Interior is clean. Asking $3500. Call or text (973)901-5525





]]> Store Xcelerate http://njdsm.org/forums/showthread.php?10468-1998-BMW-528i-black-on-black-135k-miles Flag nor fail http://njdsm.org/forums/showthread.php?10467-Flag-nor-fail&goto=newpost Sat, 12 May 2012 05:10:52 GMT http://youtu.be/4VCfmOucr_8 http://youtu.be/4VCfmOucr_8 ]]> Videos and Non Work Safe Big Block DSM http://njdsm.org/forums/showthread.php?10467-Flag-nor-fail ETS Titanium Front Mount Intercooler setup for 2008-2012 Subaru STI http://njdsm.org/forums/showthread.php?10466-ETS-Titanium-Front-Mount-Intercooler-setup-for-2008-2012-Subaru-STI&goto=newpost Wed, 09 May 2012 19:56:09 GMT ETS Titanium Front Mount Intercooler setup for 2008-2012 Subaru STI. This is used off a customer's car. Everything is in perfect, like-new condition, and was only taken off because the car was traded in by the customer, and all mods removed. Core is 26x11x3.5", full titanium piping, Tial bov flange, 4-ply silicone couplers, t-bolt clamps, and all mounting hardware. This kit is $1824 new, but this one just like new can be yours for $1200 with free shipping! We accept credit cards and Paypal, and of course cash if you're local. We can also do the install if you are local. Amazing deal if you own one of these cars!

View the kit on ETS's website here:
http://www.extremeturbosystems.com/E...ooler-Kit.html

]]> Store Cscat87 http://njdsm.org/forums/showthread.php?10466-ETS-Titanium-Front-Mount-Intercooler-setup-for-2008-2012-Subaru-STI <![CDATA[Nikon camera gear, bags, lighting, & accessories]]> http://njdsm.org/forums/showthread.php?10465-Nikon-camera-gear-bags-lighting-amp-accessories&goto=newpost Sun, 06 May 2012 20:45:30 GMT Iv decided to unload some of my nikon specific camera gear, bags, lighting equip. Im planning to switch over to a mirror less rangefinder style... Iv decided to unload some of my nikon specific camera gear, bags, lighting equip. Im planning to switch over to a mirror less rangefinder style camera system. (debating Fuji Xpro vs Sony NEX). Most of this stuff has just sat in a closet for the last year or so unused once I stopped shooting weddings.

Will add pics asap, much of this stuff Im going to end up putting on ebay to quick sale, but figured Id give NJDSM guys a first shot.

Tokina 100mm F2.8 macro lens for nikon. $385 Focuses with magnification up to 1:1 (a real macro lens, works on FX and DX)


Manfrotto monopod $50


Photoflex LiteDome small soft-box for speed lights. Excelent for "light on a stick" or product photo wireless use! $85


Savage background stand w/ 3 rolls of seamless paper: Black, White, and "Blue Screen" $150 (need to pick up in van/truck, paper rolls are 10ft long I think)


Tamrac Speedroller 2 camera suitcase. REALLY NICE! $150 Holds 2 DSLR (one with 70-200 attached), about 5-6 lenses, 2-3 flash. I used to fit an entire wedding kit in it.


Tamrac Velocity 9 shoulder sling type camera bag $35


Tamrac Expedition 4 backpack type camera bag (rugged & weather resistant...ideal for camping/hiking) $50


Lowepro offtrail 2 waist/shoulder $25
]]> Store Nate Crisman http://njdsm.org/forums/showthread.php?10465-Nikon-camera-gear-bags-lighting-amp-accessories Island 5/4 or 5/6 or 5/9 http://njdsm.org/forums/showthread.php?10464-Island-5-4-or-5-6-or-5-9&goto=newpost Fri, 04 May 2012 13:43:05 GMT Anyone up for Test & Tune at Island this weekend? Im going to try and go tonight if the weather holds out, if not, then Sunday the 6th. If that's crap for rain, then wednesnesday BBQ night.

Taking my red 1g auto streetcar. ]]> General Discussion Nate Crisman http://njdsm.org/forums/showthread.php?10464-Island-5-4-or-5-6-or-5-9 My company is looking for software engineers http://njdsm.org/forums/showthread.php?10463-My-company-is-looking-for-software-engineers&goto=newpost Fri, 04 May 2012 01:22:38 GMT I work for a small but rapidly growing company in Lyndhurst NJ and we are looking for people who have Linux experience who are fluent in LAMP. You... I work for a small but rapidly growing company in Lyndhurst NJ and we are looking for people who have Linux experience who are fluent in LAMP. You can either PM me or send me your resume at kyle.swankie at gmail.com. I'll explain the company a bit more there and pass the resume on to our head engineers. Thanks ]]> General Discussion rotorocker http://njdsm.org/forums/showthread.php?10463-My-company-is-looking-for-software-engineers FS: Spinergy Rev X wheelset http://njdsm.org/forums/showthread.php?10462-FS-Spinergy-Rev-X-wheelset&goto=newpost Thu, 03 May 2012 18:00:16 GMT For you road guys... I have a set of 700c Spinergy Rev X wheels for sale. Rear has a Dura-Ace 8spd gearset on it. Looking for $500 for the... For you road guys...
I have a set of 700c Spinergy Rev X wheels for sale.
Rear has a Dura-Ace 8spd gearset on it.

Looking for $500 for the set or $300 each.

IMG_1050.jpgIMG_1049.jpg
Attached Images
]]> Store hindle http://njdsm.org/forums/showthread.php?10462-FS-Spinergy-Rev-X-wheelset where the f*ck are the DSM ??? http://njdsm.org/forums/showthread.php?10461-where-the-f*ck-are-the-DSM&goto=newpost Sun, 29 Apr 2012 23:57:53 GMT i am seeing less ans less DSM racing at the track... and the ones I do see, look like they have been to hell and back. i am seeing less ans less DSM racing at the track... and the ones I do see, look like they have been to hell and back. ]]> General Discussion Big Block DSM http://njdsm.org/forums/showthread.php?10461-where-the-f*ck-are-the-DSM 2G Headliner, Battery, 1G Downpipe http://njdsm.org/forums/showthread.php?10460-2G-Headliner-Battery-1G-Downpipe&goto=newpost Fri, 27 Apr 2012 21:34:47 GMT - Racing Seats (Red with Black Accents) with modified brackets to bolt into a 1G - $125 each or $200 for both -1G FWD Downpipe with Test Pipe -... - Racing Seats (Red with Black Accents) with modified brackets to bolt into a 1G - $125 each or $200 for both

-1G FWD Downpipe with Test Pipe - $120 together or $100 for the downpipe and $50 for the test pipe.

- 2G Headliner - was saving this for my personal DSM to re-do the headliner but never got around to it so it's up for grabs. It will need to be upholstered. $25

- Battery - $30

- Powder Coating Gun - $50
















]]> Store VTEC_THIS http://njdsm.org/forums/showthread.php?10460-2G-Headliner-Battery-1G-Downpipe Wtb: 1g manual steering rack http://njdsm.org/forums/showthread.php?10459-Wtb-1g-manual-steering-rack&goto=newpost Fri, 27 Apr 2012 16:56:33 GMT I'm looking for a 1g manual steering rack. Let me know if you have one or know where I can get one.

Thanks
Shawn ]]> Store Icemn999 http://njdsm.org/forums/showthread.php?10459-Wtb-1g-manual-steering-rack 05 Xterra http://njdsm.org/forums/showthread.php?10458-05-Xterra&goto=newpost Fri, 27 Apr 2012 16:20:17 GMT You know that story about a used car "only driven by a little old lady from passedina to and from church...."? Well this is the real deal.

A secretary here at work asked me if I knew what craislist was, her sister needs to sell her truck. I told her without pics it wont sell. So I take a look at this thing, and it looks like a brand new truck off the showroom floor. She drives it every day but only to the store or to visit people in town. I know they'll take a G less than their obo price. I put it on craigs yesterday and they already have a ton of calls so if you're interested better call ASAP.

Looks like a new truck, can tow 5,000 lbs., figured I'd mention it here.

http://newjersey.craigslist.org/cto/2980363012.html ]]> Store TurboMike http://njdsm.org/forums/showthread.php?10458-05-Xterra DSMpartout Spring Cleaning Sale: Aftermarket parts http://njdsm.org/forums/showthread.php?10457-DSMpartout-Spring-Cleaning-Sale-Aftermarket-parts&goto=newpost Wed, 25 Apr 2012 16:44:59 GMT 1g Dual gauge a pillar pod $20 Image: http://nathancrisman.smugmug.com/Cars/94-Green-GSX-stick/i-BMKQwdG/0/M/DSC1755-M.jpg AEM EUGO wideband... 1g Dual gauge a pillar pod $20


AEM EUGO wideband gauge (includes sensor and harness not shown) $150


Walbro GSS341 fuel pump $50


FIC 650cc injectors $175


Greddy radiator cap $10


FP 4&rdquo; intake pipe w/ couplings $100.00 looks like it had fittings on bottom that have been epoxied over.


Forge BOV - 1G flanged $125.00


punishment racing aluminum radiator $150.00


slim fans w/ aluminum shroud $95.00


2g dual dash gauge pod $20.00


4" PVC intake, maf adapter, & air filter $25 (2g maf not included, shown in pics only for reference)


3" turboback exhaust. Bosal SS catback, mild steel downpipe $300



Competition Clutch 1620 (stg 4 w/ sprung 6puck disk) $250


aluminum radiator catch can w/ sight tube and pressure cap $40


Aluminum radiator - Godspeed brand - direct fit $200


Momo steering wheel with mitsubishi adapter $175
http://dsmpartout.com/wp-content/upl...s/DSC_8760.jpg

Innovate LC1 wideband - control box only - no sensor $75


ACT 2600/street disk clutch kit $200


ACT 2900/puck disk clutch kit $200


2G FMIC kit. $425 26×12x3.5&Prime; core - Brushed stainless piping, 1G nov flange, silicone couplings and Tbolt clamps. ??Either ETS or Slowboy kit??

]]> Store Nate Crisman http://njdsm.org/forums/showthread.php?10457-DSMpartout-Spring-Cleaning-Sale-Aftermarket-parts